Stainless Steel Angle Bar

Angle Bar is L-shaped, formed by bending a Flat Bar into a 90-degree angle. It is primarily used for structural support and reinforcement. Equal Bar has two legs/sides of the right angle that are of equal length, and Unequal Bar has two legs/sides of unequal length. 

Stirlings stocks Stainless steel Angle Bar manufactured to ASTM A276/484, in Austenitic Grades 304 and 316, manufactured Hot Rolled Annealed and Pickled (HRAP).

Angle Bar is available in 6 metre lengths, in thicknesses from 3.00mm to 10.00mm.

  • Equal Angle Bar is available in sizes from 3.00mm x 20.00mm x 20.00mm to 12.00mm x 100.00mm x 100.00mm.

  • Unequal Angle Bar is available in sizes from 6.00mm x 25.00mm x 75.00mm to 10.00mm x 150.00mm x 100.00mm.

Everything currently in stock is specified in the tables below. 

Alternate Unequal Bar variations and Cold Formed Angle Bar are available upon request via indent. 

● Stocked Item ○ Market Available

Anything not currently in stock/Market Available can be obtained via indent. 

 Equal Angle Bar

Size (mm) 304 316 Weight (kg/m)
  BA304 BA316  
3 x 20 x 20 ● ● 0.90
25 x 25 ● ● 1.15
30 x 30 ● ● 1.40
40 x 40 ● ● 1.85
50 x 50 ● ● 2.45
       
5 x 25 x 25 ● ● 1.80
30 x 30 ○ ● 2.20
40 x 40 ● ● 3.00
50 x 50 ● ● 3.80
       
6 x 25 x 25 ○ ● 2.20
30 x 30 ○ ● 2.90
40 x 40 ● ● 3.55
50 x 50 ● ● 4.50
65 x 65 ● ● 5.95
75 x 75 ● ● 7.00
100 x 100 ● ● 9.90
       
8 x 50 x 50 ○ ● 6.00
65 x 65 ○ ● 7.87
75 x 75 ○ ● 9.30
       
10 x 50 x 50 ○ ● 7.50
75 x 75 ● ● 11.20
100 x 100 ● ● 16.20
150 x 150  ○ ●  23.67
       
 12 x 75 x75 ● ○  9.20
 100 x 100 ○ ● 17.67 

 Unequal Angle Bar

Size (mm) 304 316 Weight (kg/m)
  BAU304 BAU316  
6 x 75 x 50 ○ ● 5.7
100 x 50 ○ ● 6.9
100 x 75 ○ ● 8.1
       
10x 150 x 100 ○ ● 19.2

 

Technical Data

Hot Finished to ASTM A276 / A484  

 

Length of Leg Length Tolerance
up to 150mm ± 3.0mm
over 150mm ± 5.0/-3.0mm